Click for Technical Data

The T-Shaped machine body is good for an outstanding stability of the machine, thus assuring high-precision grinding. The UWS4 is a very versatile, but easy-to-operate system. Due to the protruding longitudinal - and cross slides, grinding dust will fall freely, thus positively influencing the service life of the machine. The standard design uses s front panel containing all elements of control. On request an against extra-cost, another set of controls will be assembled to the rear of the machine. This is a condition for comfortable and easy work for your operator who will be able to do his working sitting.

Range of Application 

High accuracy of a correctly ground cutting edge of a tool is indispensable for an economic production. Using the respective accessories, regrind small and medium size tools such as milling cutters-straight and spiral fluted, strepdrills, hobs, counter sinks, lathe tools. The range of application also comprises surface cylindrical, internal, in Tool making.

TECHNICAL DATA   MAJOR DIMENSION DIAGRAM
	Click for Images of Accessories
MAJOR DIMENSIONS OF UWS4    DIMENSIONS Total Height  1550 mm Total Width 1415 mm Total Depth 1000 mm Height of upper edge clamping - surface above floor 1000 mm Max. distance of centre of grinding wheel spindle above table, bore turned up  410 mm Min. distance of center of grinding wheel spindle above table, bore turned up  110 mm Max. distance between centres  700 mm Height of centres with UT, HTR and cylindrical grinding attachment  140 mm with all other accessories  120 mm clamping surface of the table  930 x 180 mm number of T-slots on the table     2 mm hand lever controlled travel of the table  540 mm cross slide travel  250 mm travel of the rise and fall rest  200 mm swivel range of the grinding head ( horizontal )    360 0    swivel range of the grinding -wheel spindle ( vertical )  360 0 feed of vertical - and cross slide per division      0.01 mm drive motor speed  1400/2800 rpm rating  0,70/0,85 kW grinding-wheel spindle speeds 2600/5200 rpm by shifting the V-belt 3700/7400 rpm net weight of the machine with standard equipment -620 kg gross weight of the machine with standard equipment -835 kg dimensions of the packing case  165 x 120 x 185 cm volume    -3.7 m 3   DIAGRAM ( Click on the Picture to enlarged View )

TOP